search printer model 3830

Hardware Setup For 3830

  1. First of all, unbox your HP Printer carefully for 3830. Along with that, remove all the packaging material from the Printer. 
  2. Besides that, cautiously remove plastic tapes from every section of your Printer without damaging it.
  3. Now, place the HP Printer on a flat and stable location which is within the Network range. 
  4. Next, you should set up the Paper Tray. Then, load A4 size plain white sheets in it. 
  5. Thereafter, prepare  Ink Cartridges by properly filling ink in it. Then, set it up. 
  6. After that, connect the Printer to an uninterrupted Power Source like a Wall Outlet using its Power Cord and switch it on. Thereafter, turn on the Printer by pressing its Power button for 3830.
  7. As such, 3830 will light up its Power Lamp and Control/ Display Panel. At the same time, it will start the Initialization and Alignment process. Hence, wait for the same. 
  8. Then, complete the Initial Setup by accessing its Control/ Display Panel. In other words, set your Language; Country/ Region; Self-managed etc.
  9. Now, wait while the Setup completes properly. Thereafter, 3830 requires you to Configure the Printer and Install Drivers.

Wireless Setup For 3830

  1. In the very first place, connect the Printer to your Wireless Network for 3830. For this, turn on your Network Access Point i.e. Router. Besides that, ensure its proper functioning. At the same time, confirm that it is the same Network where your Computer is connected. 
  2. Now, turn on the Printer. But ensure it is not connected to the Router/ Computer with an Ethernet/ USB Cable. 
  3. Along with that, you must acquire your Wireless Network’s  Name (SSID) and Password. You will need the same for completing the 3830 process. 
  4. After that, go to your Printer’s Control Panel displaying the “Home” screen. In order to access it, tap the Home icon at the upper left-hand corner.   
  5. Next, you should navigate the Printer’s Control Panel and locate the “Setup” icon. Now, tap on it. 
  6. Thereafter, tap “Network”/ “Network Setup”.
  7. On the following screen, tap on the toggle button to turn on “Wireless”. 
  8. Now, select the “Wireless Setup Wizard” for 3830. 
  9. Then, tap ‘Yes” on the following Wireless Setup Prompt.
  10. As a result, 3830 will search for the available “Networks” within its range. After that, it will display a list of “Networks” that are detected.   
  11. Hence, locate your Network’s Name and select it. Then, tap “OK” and confirm your choice.
  12. The following window seeks your Network’s Security Password. Therefore, enter the same correctly. Then, tap “OK”. 
  13. Consequently, 3830 will connect the HP Officejet 3830 Printer with your Network. Hence, wait for the same. 
  14. After that, you will notice that the Printer’s Wireless Lamp is lit and stable. Now, you should tap on “Finish” or “Done”  and exit the Setup Wizard. 3830

* HP Printer Driver Download 

  1. First of all, download 3830 by turning on your “Computer”. 
  2. Besides that, connect it to a stable and high-speed Internet Connection. 
  3. Now, you should access any Web Browser available on your computer. For eg., you may have Internet Explorer, Firefox, Safari, Mozilla, Google Chrome etc. on your computer. 
  4. After that, go to the HP Printer’s official website for 3830. For this, type in “” in the Browser’s Address Bar. Then, hit the “Enter” key. 
  5. As a result, it will open the required webpage on your system. This window displays a “Search Bar” prompting you to enter your  Pinter’s Model Number. Hence, enter “HP Officejet 3830” in this bar. 
  6. Then, click on the “Search’ button beside it.
  7. As a result, it will redirect you to the Driver Download’s window for 3830. Here, you will find a secure and dedicated link to download the Driver. Hence, click on “Download” and initiate the downloading process. 
  8. Thereafter, wait while the process completes successfully. 

HP Printer Driver Installation

* For Windows

  1. To begin with, look for the downloaded Driver Software on your system. In other words, check your system’s default download location, usually the “Downloads” folder. 
  2. After that, double-click on the downloaded software and open it. 
  3. Now, a Security Warning pop-up will appear on your screen prompting you to permit the 3830 process. Hence, click on the “Run” tab to proceed.
  4. The following window provides the User Account Control menu. Hence, click “Yes’ and permit the installation. 
  5. Then,  click “Continue” to proceed further.
  6. Next, you will get the Software Selection window. Here, you must select the “Customize Software Selection” option. 
  7. Consequently, a list of software available for installing 3830 will appear on your screen. Hence, make a choice appropriately. Then, click “Next”.
  8. On the following window, you will get the License Agreement. Hence, read the terms carefully by scrolling down the page. 
  9. Thereafter, tick mark the checkbox for “I accept the terms in the License Agreement”.
  10. Then, click “Next”.
  11. As a result, HP Printer Driver Installation process will begin for 3830. Hence, wait for it to complete properly.
  12. Then, click “Next”.
  13. Now, it will redirect you to the Connection Options window. Here, you will get the Wired or Wireless option. Therefore, go for the “Wireless” option since your HP Printer has been configured for a Wireless Network. 
  14. Subsequently, follow the given instructions and complete Setup for the Network.
  15. Once the 3830 process completes, click on “Finish” to exit the Setup Wizard.
  16. At last, restart your device. 

 * Install Driver On Mac

  1. To begin with, look for the downloaded Driver Software on your system. In other words, check your system’s default download location, usually the “Downloads” folder. 
  2. After that, right-click on the Driver Software. Then, click on “Open”.
  3. On the following Security Prompt, click “Open” once again.
  4. Thereafter, you will get the links for “End User License Agreement” and “Privacy Statement” on the next window. Now, click on the links one-by-one and closely review the documents. 
  5. Subsequently, tick mark the corresponding checkboxes and accept terms for 3830. 
  6. Now, click “Continue” and proceed further. 
  7. Next, you will get the Setup Guide instructing you to turn on the Printer. Then, connect it with the Network. Hence, follow the steps and complete the Network Setup. 
  8. Additionally, confirm that Printer and Computer are hooked up to the same Network.
  9. Thereafter, a pop-up box will prompt you to Restore Printer’s Network Settings”. Now, you must select “Yes’ if the Printer and Computer are connected to different Networks. Otherwise, click “No”.
  10. After that, complete the Network Setup by following on-screen steps.
  11. Subsequently, you will get a list of available software for 3830. Therefore, select appropriately. 
  12. Then, click “Install”.  
  13. Now, type in your Mac Administrator Login Username and Password. Thereafter, click “OK”.
  14. On the following window, click “Continue”.
  15. Consequently, it will begin the Installation process. Hence, wait for the process to complete. 
  16. At last, restart your device.